Fan Mould | Daily Use Mould | Kitchen Use Mould | Auto Mould | Home appliance Mould
Service:0086-576-84026130
Plastic Mould Quality control
Contact Us
Company Name :
Taizhou Huangyan King Mould CO.,LTD.
ADD :
Ao'an Industrial Zone, Huangyan,Taizhou, Zhejiang, China
TEL : +86-576-84026130
FAX : +86-576-84026175
Mobile : 0086-13757670266
0086-15988910657
E-mail : info@chmold.com
msn : yimking@hotmail.com
skype : kingmould87
A good design is the key to the qualified mould. The injection mould manufacture who can make good design of the mould can reduce the cost of manufacture, avoid the repair work after the mould testing.
Plastic Product Inspection
Whether the product drawing offer by customer or made by King Mould. Our mould designer Will check the detail before starting the design work, For example, they'll check:
Whether shrinkage rate of the material is fair enough,
Whether the movement is feasible upon the existing product design,
Whether the draft angle is big enough for the product releasing,
Whether the rib of the product is good enough to avoid the shrinkage mark,
Whether the product will stick to the cavity,
Whether the welding line is created at the import surface,
Where's the best place to make air venting slot, etc.
Moldflow Analysis
By the meanwhile, we make the inspection together with advanced software like Moldflow to find out the best gate location. □ Plastic Injection Mould 3D Design
After the product file checked fine. Then mould structure engineer start their working. One engineer's responsible for one project. We ensure that the design output for a product satisfies the customer's requirement. Usually the customer from Europe make the design according to Hasco standard, customer from the US will choose D-M-E standard, and most of domestic customer choose LKM standard.
Plastic Injection Mould 2D Design
When the mould structure design finishes, we have 2D designers to make part drawings and assembling drawings. One for our technical staff and another for our customer. We ensure that all the detail of the component put in the manufacture is the same with the design in the computer so that it could be easily maintainence at the side of our customer.
Moulding Service